[MotoEng.com]

Hi all,

Does anyone know of any diagnostic connector or CANBUS connector hidden away somewhere?
It would save me a lot of taking bits off and searching... (Assuming it's not via the USB-C)
There seems to be very little info out there on it's CAN communication.

For those interested, I'm looking to (read only) information on the CANBUS to access more detailed information on it's BMS, Controller, etc... (Cell/Module voltages/temperatures, diagnostic info, and generally anything recorded by the BMS/Controller and other sub systems. (I am aware of all the warranty related issues)

Any info, or any technical chat appreciated...

www.motoeng.com

 

[Menoche]

Connector is on the right side under the top plastic cover of the charger, a small 6 pin connector. Needs an adaptor to hook up OBD II

 

[NoRemorse]

Any idea on where a connector could be procured or made?

 

[Menoche]

Available on a,a on already

 

[CaliforniaKiwi]

Hi all,

Does anyone know of any diagnostic connector or CANBUS connector hidden away somewhere?
It would save me a lot of taking bits off and searching... (Assuming it's not via the USB-C)
There seems to be very little info out there on it's CAN communication.

For those interested, I'm looking to (read only) information on the CANBUS to access more detailed information on it's BMS, Controller, etc... (Cell/Module voltages/temperatures, diagnostic info, and generally anything recorded by the BMS/Controller and other sub systems. (I am aware of all the warranty related issues)

Any info, or any technical chat appreciated...

www.motoeng.com

I'm also keen to connect for read only. Did you manage this? Do you have a github repo?

Dan